Tragus Piercing

Tragus Piercing Tragus piercings are popular, even though they are not as common as other ear piercing types. Tragus piercings can be very stylish and they accentuate your ear in a discreet but fashionable manner. It is a great piercing for those who prefer cute jewelry that is not too big or “in your face”. It also goes well with other ear piercing types.

Tragus Piercing Placement

A tragus piercing is made on a specific part of the ear (tragus). This is a little projection located in front of the ear canal. Most people have this part of the ear developed enough so they can have a tragus piercing performed without a problem.

In fact, it’s very rare not to be able to have a tragus piercing because of the anatomy. The vast majority of people have a tragus big and developed enough to accommodate this type of a piercing.

The Procedure

While tragus piercing is not the most common ear piercing type, it’s still pretty common, and it’s not a challenge for an experienced piercer. The procedure is pretty straightforward.

This piercing is typically done with a small gauge, hollow piercing needle. It’s important to be pierced with a specialized needle and not with another instrument (such as a piercing gun).

Users may choose to be pierced with a straight or a curved needle, which means the hole itself will be either straight or curved. This may dictate the type of jewelry you can wear in your piercing.

It’s important to note that tragus piercings are nor particularly painful. This area of the ear has small number of nerve endings. This way, even beginners and those who fear pain can have a tragus piercing without a problem.

After the piercing is done, it’s important to follow the aftercare instructions and to take a good care of your new piercing during its healing time.

Jewelry

Jewelry worn in a tragus piercing is usually small and discreet, but still attractive and stylish. There is no specialized tragus jewelry made, so people opt for universal and multi-functional jewelry pieces.

Some of the most common jewelry types include small diameter Captive Bead Rings, studs and posts. Some people also like to wear barbells in their tragus piercings.

Additional Info

  • While tragus piercing is usually not problematic and doesn’t tend to cause problems, some people report minor discomfort while wearing earbuds and other types of earphones. This is something to think about.
  • Clean your new piercing twice per day using a saline solution. You should use a cotton ball soaked in the saline solution so you can easily clean around your piercing.
  • Resist the urge to touch your new tragus piercing or to play with the jewelry. This is never a good idea for any piercing.
  • Wait until the piercing is healed (at least partially) before you change your tragus jewelry.
  • During the initial healing time, do what you can to avoid irritation. Don’t hold your phone on the pierced ear and avoid sleeping on that side.

Popular Ear Piercing Types

Ear PiercingEar is the most popular body part for piercing. Almost all parts of the ear can be pierced, so there are many different types of piercings performed on the ear. Some are more common than the others, some are more sensitive than the others and take longer time to heal. Regardless of the type, ear piercings are relatively simple to perform and they can be very effective.

Here is the list of the most popular ear piercing types:

Earlobe Piercing

Earlobe piercing is the most popular type of ear piercing. In fact, it’s the most common of all body piercings. Earlobe piercing is so widespread and socially acceptable that many people don’t even consider it body piercing in true sense of the word. Earlobe piercing is easy to perform and it heals quickly. There are many types of earrings suitable for this type of piercing.

A special type of earlobe piercing is stretched piercing. It’s sometimes called “gauging”, though it’s a wrong term: gauge is the size of the jewelry. Many types of piercings can be stretched to a larger size, but the most common are stretched earlobes. There are special types of jewelry made for stretched piercings: ear plugs, flesh tunnels, earlets, tusks, spirals, and more.

Industrial Piercing

An industrial piercing (also known as the scaffold piercing) consists of two holes connected by a single jewelry piece. It’s typically done on the upper ear cartilage. During the procedure, two piercings are made: one close to the head and the other further down the cartilage on the opposite side of the ear.

The most common jewelry type for industrial piercings is long, straight barbell. It’s inserted through the first piercing from behind the ear and it goes diagonally across the front of the ear cartilage to the second piercing. It’s not uncommon to wear a pair of captive bead rings instead of a straight barbell. Those who wish to use straight barbells for their industrial piercings can choose between numerous unique barbells with special decorations or spirals to make their piercing stand out.

Helix Piercing

The helix piercing is performed on the outer curly rim of the ear cartilage. It’s important that this piercing is done with a needle and not piercing gun (in fact, it’s best to never use a piercing gun; it’s only suitable for earlobe piercings and it’s not even the best method to perform that type of piercing). Most people get more than one helix piercing to wear several jewelry pieces on that side of the ear. A special type of helix piercing is the orbital piercing. Here, two piercings are made and the jewelry goes from back to the back of the ear, so it looks like it’s orbiting through the cartilage.

Anti-Helix

The anti-helix piercing is done on the ear part just the opposite of the helix. It’s also known as the snug piercing. This type of piercing requires micro-jewelry. Many people choose to get both helix and anti-helix piercings and pair them with the same jewelry types. The most commonly used jewelry for this type of piercing are curved barbells or circular rings.

Tragus Piercing

The tragus piercing is performed on the small piece of the thick cartilage projecting in front of the ear canal. It’s typically done at a small gauge (16g). The most common jewelry for this piercing is captive bead ring.

Anti-Tragus Piercing

The anti-tragus piercing is performed on the part of the ear cartilage directly above the earlobe.

Transverse Lobe Piercing

This is a piercing that goes horizontally through the ear lobe. It takes more time to heal than the regular earlobe piercing. Typical jewelry worn in this piercing are straight or curved barbells.

Rook Piercing

The rook piercing is done at the folded inner rim of the ear. This inner ridge of the ear runs down the center and it’s parallel to the helix or outer rim. It’s important to understand that the look of this piercing depends a lot on the anatomy of your ear.

Conch Piercing

There are two types of the conch piercing: the inner and the outer. The inner conch piercing is made on the center cartilage adjacent to the ear canal. These piercings are usually done at larger gauges (10g or 8g) and they can be stretched to accommodate ear plugs. The most common jewelry type for this piercing is barbell.

The outer conch piercing is made on the flat part of the top outer ear. It’s done at a smaller gauge (16g). Typical jewelry for this piercing is curved barbell or a captive bead ring.

Daith Piercing

The daith piercing is performed on the outer rim of the ear cartilage, closest to the head. It’s often performed with a curved needle to prevent damage to other parts of the ear. There is another variation of this piercing: the inner daith. This one is performed on the horizontal part of the cartilage, directly above the ear canal. The most commonly used jewelry for daith piercing is a captive bead ring.

Different Ear Piercings

 

Ears, July 2011

 

Most people that are into body modifications started with getting their ears pierced. Ear piercings are the oldest, most common, less extreme and more accepted of all body modifications. Piercing the ears can be found in all different kinds of cultures all over the world throughout history. Both men and women have been known to pierce their ears. Depending on the size and shape of one’s ear, there are many different parts of the ear that can be pierced.

 When your Ear is your Piercing Ground:

The ear lobe is the easiest, most common part of the ear that is pierced. This part of the ear can be stretched and gauged because of the type of tissue located in this area. A piercing gun is used to pierce the ear lobe. The ear piercing gun is designed in such a way, so that the ear can be pierced with the jewelry and the earring back be put on the end of the post of the earring, all in one shot. The cartilage of the ear, at the top part of the helix, is another popular area to have pierced. This piercing can be pierced with a piercing gun, however, it is not recommended because the force of the gun can cause cartilage to shatter and take the area longer to heal. The other areas of the ear are usually pierced with a hollow body piercing needle.

The helix is the upper rim part of the ear that goes down the outside about half way and meets the lobe. Many people have their helix pierced multiple times and put captive bead rings in them.  The conch is the portion of the ear that looks like a “shell” adjacent to the ear canal.  A barbell or captive bead ring is mostly worn in this area. The anti-helix is a ridge located under the helix and it contains the snug and rook. These piercings are very painful and harder to heal then most of the other ear piercings. The snug, located on the lower part of the anti-helix, is pierced with curved or straight barbells. The rook, the upper part of the anti-helix close to the head, can be pierced with a curved barbell or a captive bead ring. The folds of cartilage located closest to the ear canal is call a daith piercing. This can have a different variety of small gauge body jewelry put into the piercing.  The tragus piercing is the “little nub” over top of the ear canal.  The body jewelry used for this piercing are usually a captive bead ring, curved barbell or even labret studs.  The ridge located above the ear lobe has been labeled the anti-tragus. This is another painful piercing in the ear. And this piercing usually needs a curved barbell.

Another piercing that is often done is called the industrial. The industrial is when two separate piercings are connected with one barbell. Usually piercings within the helix are used to create an industrial piercing but some use other piercings in the ear and connect them. An orbital piercing is much like an industrial piercing in the sense that it connects two or more piercings, but instead of a barbell a ring is used.