Sometimes, it is necessary to remove your body jewelry. You may wish to change the jewelry and wear another piece, or you may wish to go without jewelry for a while. Whatever your reasons may be, you need to know how to open and remove your jewelry quickly and easily.
Different jewelry types are removed in different ways. In order to remove a jewelry piece, you need to know how this piece is designed and how to properly open it so you can take it out.
Here are quick tips on how to remove the most popular jewelry types:
Captive Bead Rings
Captive Bead Rings and other similar captive jewelry types come with a special bead that has to be removed in order to open the jewelry. To open your ring, it’s best to grab the bead with one hand and the ring with the other and then pull them into the opposite directions. This should make the bead pop out of the ring.
This process is sometimes difficult so you may need to use pliers. There are special Ring Opening Pliers you need to use for this. In case you wear large gauge jewelry, it’s best to use specialized Large Gauge Pliers.
Fixed, Seamless and Continuous Rings
These rings are a bit different than CBRs. Fixed rings have the bead attached to one side of the ring. Seamless and continuous rings do not use beads at all. They are built to be completely circular, usually with parts fitting nicely into each other. To open these rings, you should grab the bead (or, in the case there is no bead, one side of the ring) with one hand and the ring itself with the other hand and pull gently. Make sure to perform a small but firm twist. This should make ends separate and the ring will be opened.
Barbells tend to be easy to open, comparing to the rings. These jewelry types have a bar (straight, curved, circular, spiral, etc.) and a bead on the each end. The beads are screwed on the shaft. To open these barbells, simply unscrew the bead from the shaft. The same logic can be applied to labret studs.
Nostril Jewelry Pieces
Jewelry specially designed for nostril piercings is typically shaped in such a way to prevent jewelry to slip out of the piercing. It means it’s either curved or it has a small ball on the end to keep jewelry in place.
These pieces are sometimes struggle to get in and out, because they have to be tight enough to stay in the piercing during use. To remove them, you need to be aware of their shape and then carefully pull, move and turn the jewelry until it’s out.
Eear Plugs, Tunnels and Earlets
These jewelry pieces are specially designed for stretched lobes. There are many different types of plugs, flesh tunnels and earlets. Some are smooth and require O rings to keep them inside the piercing. These jewelry pieces are easily removed by simply taking the O rings out.
Flared jewelry pieces, especially double flared plugs and tunnels may be more difficult to remove, so you need to know how to manipulate the jewelry out of the piercing.
To learn more about inserting double flared jewelry, check out our article: How to Insert Double Flared Plugs and Tunnels.
Keep in mind that piercings tend to shrink rapidly after jewelry is removed. This is particularly true for new, fresh piercings but even older and fully healed piercings are not immune to it. Our bodies are quick to close the tissue, which will result in a rapid shrinkage of your piercing.
As a result, you may find out that it’s difficult to reinsert the jewelry. It may be uncomfortable or even painful. In some extreme cases it might become impossible to reinsert your jewelry. Shrinkage occurs very quickly, and it starts as soon as jewelry is taken out. Keep this in mind if you intend to remove your jewelry and go without it for some time.