GET 5% OFF
5% OFF

How to Measure for a Ball Stretcher

Ball Stretcher

Ball stretchers are popular devices many men use for increasing the scrotum length. A good ball stretcher is the one that's highly effective, quality made and comfortable for the wearer. There are some more extreme forms of this body modification, but general rule of thumb is that ball stretching shouldn't be uncomfortable and it should not cause pain; in fact, many men find it very enjoyable.

A lot of this depends on the device you use for stretching. It's important to use only specially designed and professionally made ball stretchers to ensure your safety and best results. Another thing to keep in mind is that you need to use a stretcher of an appropriate size, which means you need to know how to measure yourself for the stretcher you need.

To get a suitable ball stretcher, it's crucial to know how to measure yourself and how to size yourself for the best fit. An ill-fitted stretcher is almost useless, and it might even end up hurting you. Also, you won't be able to get the most desired and noticeable results unless you use a stretcher that fits.

For these reasons, choosing an appropriate stretcher is important. Finding the best fit and knowing when to use what type of a stretcher will ensure the best and safest results. That's why you should pay special attention to measuring.

Optimum Internal Diameter

The goal of these measurements and the average value you get is to learn about the optimum internal diameter of the ball weight you can wear. Your chosen ball weight should be loose and comfortable enough not to restrict blood flow. On the other hand, it should also be tight enough not to allow testicles to slip through.

There are several challenges when it comes to measuring, so you need to be careful and patient. The main problem is that each man's anatomy is different; there are no "standard scrotum sizes" to speak of. A lot will depend on your individual muscle tone and skin elasticity. Not to mention that the scrotum changes in size based on temperature, sexual arousal and some other factors.

Also, you will find out that your correct internal diameter will change with stretching. This is normal. What is important is to know how to measure yourself and determine the optimal diameter you might need.

It's also important to say that, when buying ball stretchers, you won't go after one size and one internal diameter only. Instead, the goal is to determine a comfortable range of sizes you can wear comfortably. This will give you more opportunities to find different ball weights that suit you.

How to Measure

Ball StretcherThere is no one good way to do it, but there are several guidelines you should follow to obtain the most accurate measure and the best fit for your ball stretcher:

  • Use a measure tape you can comfortably place around your testicles. It's important that the tape is long enough so you can change the tightness until you obtain the most comfortable measure.
  • When measuring yourself, put the measuring tape around the top of the testicles. It's important that your both testicles rest comfortably under the tape. This is your basic scrotum measure, but this isn't the number you need.
  • In order to rest comfortably on your scrotum, a ball weight has to be tight enough not to slip. This is why you should tighten the measuring tape a bit so it won't move up and down on your scrotum. At the same time, make sure it's not too tight to stop circulation. Your testicles should hang free and comfortable under the tape at all times.
  • Measure yourself and write down the result. For the most accurate measurement, it's important to perform several measurements and to write down at least 4-5 results. Some men even choose to perform as many as 10 measurements. Place the measuring tape once, record the result and remove the measuring tape. After this, place the measuring tape again and record the new result. It's very important that each measurement and tape placement is done all over again - this will minimize the errors you might make.
  • After you have obtained the measurements, calculate the average value: make the sum of all the measurements and divide it with the number of measurements. For example, if you have 5 measurements, calculate their sum and divide this number with 5. This will give you the average result, which is the number you'll need. One note: if one or more measurements turn out to be way off, disregard it and don't include it in the average sum. Perform another measurement instead. It's very important to find the most accurate average number.

Calculating Comfortable Inner Diameter

The next thing you need is to calculate the comfortable diameter for your ball stretcher. Remember, this comfortable diameter is not one number or one size: what you need to determine is a range of sizes you are comfortable with.

A range gives you an opportunity to try and wear different sizes and types of ball stretchers without them ever becoming uncomfortable. Some ball stretchers are tighter and some people prefer it that way. Other stretchers are looser on the scrotum. Also, don't forget that testicles change in size depending on many factors (such as temperature), so it's another thing to take into account.

You need to know what's your comfortable range of sizes to know which stretchers you can use safely. There is the smallest (tightest) size you can wear comfortably and the biggest (loosest) size you can wear without the ball weight slipping off. Anything in between these sizes is ok for you to use.

As a general rule, the tightest size you can wear is 0.74 of your measurement. To get this number, multiply your average measurement result by 0.74. The loosest one you can wear is 0.8 of your measurement. To get this number, multiply your average measurement by 0.8.

Finally, you need to use these numbers to calculate the range of comfortable inside diameters. Divide the numbers you have by 3.14. The two numbers you get give you the range of comfortable inner diameters you can wear.

When purchasing ball weights, you should always seek those with the inner diameter between these two numbers. This is the best way to obtain the most comfortable ball weight for yourself.

To summarize:

  • Measure your scrotum above the testicles 4-5 times. Record the results.
  • Get the average result.
  • Multiply this result by 0.74 and 0.8 to get the tightest and loosest size you can wear.
  • Divide each of these results with 3.14 to get the tightest and loosest inner diameter you can wear.
  • Order ball weights with inner diameters between these two sizes.

Also, when ordering your ball weight, make sure that you're working with the right measurements. If you know your comfortable inner diameter range in inches, make sure to order ball weights with this size in inches or convert the size to millimeters. It's best to always know your comfortable inner diameter in both inches and millimeters, so you can always order ball weights without a problem or confusion.

Share: